|
Subjects |
|
1. Permanent insulating shuttering system |
|
2. Internal insulating floor finishing system |
|
3. Construction products made of animal fibres for acoustic and thermal insulation |
4. Construction products made of vegetable fibres for acoustic and thermal insulation
-
Amendment presented
-
Amendment regrouping previous versions
-
cluster 1 for Factory made products made of vegetable and/or animal fibres
-
cluster 1 Rev1 for Factory made products made of vegetable and/or animal fibres; Rev 1
-
cluster 2 for in-situ formed loose fill products of vegetable or animal fibress
-
Thermal insulation material and/or acoustic insulation material made of hemp fibres to be used under floating floors.
|
|
5. Kit for traffic noise reducing devices (using hollow blocks of cement bonded wood chips as permanent shuttering system) |
|
6. Prefabricated compressed mineral wool boards with two layers of acrylic paints (on the external side of the product) |
|
7. Lightweight sound absorbent baffle made of wood fibres (laminated particle board, for interior walls) |
|
8. Sound absorbing elements for internal use, made of melamine resin foam with variable surface structure, used with or without coating |
|
9. Vibration and impact noise isolation with floating floor systems. Surface mats and discrete (pads) resilient isolators as element of floating floor systems. |
|
10. Bitumen on coated polystyrene granules as a dry mix for impact sound insulation, |
|
11. Large-sized fibre gypsum panels used for walls of prefabricated houses. |
|
12. Channel bars (cast-in steel channel bars) |
|
13. Vibration and noise isolation with elastically fixed wall panels (elastomeric or composite-elastomeric materials placed between supported wall element and the structural element of the building) |
|
14. Chemical anchoring kit, consisting of a polymer resin and an activator contained separately within a single cartridge. Complete mixing when extruded |
|
15. Special anchors (bolt and eccentric sleeve of stainless steel) |
|
16. Wall plates made of stainless steel |
17. Kit consisting of a trap with partially mechanical closure, mounted in a non-trapped gully
17.1 Kit consisting of a trap with partially mechanical closure, mounted in a non-trapped gully – Rev 1 |
|
18. Rice husks in bulk |
19. Rubber-based expansion anchor
19.1 Rubber-based expansion anchor – Rev1 |
|
20. Cast-in anchor bolt |
|
21. Steel plate with cast-in anchor(s) |
|
22. Kit of epoxy concrete / glassfibre-reinforced polyester anchors / epoxy mortar |
|
23. Powder actuated fastener for the fixing of insulation material |
|
24. Connection and protection devices for load-bearing pre-cast concrete piles (two products: pile joint and rock shoe) |
|
25. Solid wood slab element (bridges) |
|
26. Punching preventer for concrete slabs |
|
27. Solid wood slab element (buildings) |
|
28. Roof insulation supporting waterproofing systems |
|
29. Cellulose-reinforced bitumen shingles |
|
30. Stud rails and double head studs for increasing the punching capacity of flat slabs on columns |
|
31. Homogenous building board for external cladding |
|
32. Composite structural floor system |
|
33. Internal covering system of gypsum fibre boards |
|
34. Homogenous building board for internal lining |
|
35. Gypsum bonded particleboard |
|
36. Cavity trays |
|
37. Couplings for standardised reinforcing bars |
|
38. Pressboard façade claddings |
|
39. Modular building panels |
|
40. Fastener of external wall claddings |
|
41. Microprismatic retro-reflective sheetings |
|
42. Building kit made of special components of wood-based materials |
|
43. Column shoes |
|
44. Connector for Sandwich elements of concrete |
|
45. Kit for manhole top consisting of Cover and additional rings made of plastic for different purposes |
|
46. Balcony glazing system without vertical frames |
|
47. Composite roof waterproofing kit |
|
48. Mechanical fastening system for fixation of thermal insulation in flat or pitched roofs made of steel |
|
49. Gas and watertight seals for pipes in the area of wall and floor penetrations |
|
50. Ceiling/flooring elements made of wooden boards or laths, glued on the flat side |
|
51. Sealing kits, profiles and strips usually made of foamed polyrethane, plastic impregnated bitumen, or butyl |
|
52. Joints sealing compounds and profiles |
|
53. Roof systems: large metal shells with or without thermal insulation |
|
54. Chemical waste drainage system |
|
55. 3D Construction Kit |
|
56. Steel truss for roofs |
|
57. Prefabricated roller shutter box |
|
58. Vibration and noise isolation with elastically suspended ceilings |
|
59. Anchor for External Thermal Insulation Composite Systems (ETICS) |
|
60. Tension Rod System |
|
61. Ventilation opening device with acoustic damping |
|
62. Wood shavings in bulk to be used for thermal insulation |
|
63. Kit for injection piles (composite steel/concrete piles) with a structural member of defined steel, dia 63,5 mm |
|
64. Elastomeric bearings for the building sector of type "b": Profiled elastomeric bearing |
|
65. Sliding bearing |
|
66. Admixture for concrete recycling "Delvo Stop 10G" |
|
67. Admixture "Delvo stop 10 G" for washing water |
|
68. Rapid setting cement A, B and C |
|
69. Rapid setting cement |
|
70. Timber units for walls and roofs |
|
71. Single point supported vertical glazing |
|
72. Point fastener |
|
73. Surface water repellent product, hydrofobic agents based on organo-metallic substances |
|
74. Coating system eliminating electrostatic charges for facilities used for storage, filling and handling of water endangering liquids. |
|
75. Coating system to be used for facilities used for storage, filling and handling of water endangering liquids. |
|
76. Fire resistant glazed kits |
|
77. Wood fibre insulation as boards sprayed in situ |
78. Thermal insulating board made of mineral material
78.1 Thermal insulating board made of mineral material |
|
79. Kit for pipe system consisting of outer pipe made of concrete, unreinforced or reinforced and inliner made of unplasticized polyvinylchloride (PVC - U) which are fixed |
|
80. Light composite wood based beam |
|
81. Lightweight framing elements for non-ventilated sheet metal façades |
|
82. External thermal insulation system based on cement-free adhesive mortar And base coat |
|
83. Fire screen (A barrier to prevent the spread of fire, smoke and sparks in ventilation ducts) |
|
84. Fabric connecting joints |
|
85. Level-crossing systems (types A1, A2 and B) |
|
86. Plastic piping kits for the transport system of cold and hot water intended for human consumption, made of PE-RT with ot without barrier layer |
|
87. Double-wall cylindrical flat-bottom tank made of GRP |
|
88. Spherical, double-walled tank of polymer concrete faced with GRP |
|
89. Single-wall cylindrical flat-bottom tank of GRP |
|
90. Concrete screw for anchorage in normal-weight concrete |
|
91. Cartridge fired pin for connections for thin gauge steel members and sheeting |
|
92. Steelwork connector |
|
93. Buried glass reinforced filament wound(GRE)piping systems for the transport under pressure of water intended for human consumption |
|
94. Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water intended for human consumption in polluted soils |
|
95. Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water not intended for human consumption |
|
96. Buried glass reinforced filament wound (GRE) piping systems for drainage and sewerage with or without pressure |
|
97. Plastic piping kits for heating systems, made of PE-RT with an oxygen barrier layer |
|
98. Piping made from thermoplastic materials, for the transport of chilled water |
|
99. Factory made loose fill cellulose glass |
|
100. Pile Pipes made of ductile iron |
|
101. Thermal insulation kit for roofs intended to be assembled in situ |
|
101.1(rev 1) Thermal insulation kit for roofs intended to be assembled in situ |
|
102. Vibration isolation of buildings with elastomeric bearing |
|
103. Roofing Underlay |
|
104. Binder in Concrete and mortar |
|
105. Door Treshold with build-in draining system for draining off of water |
|
106. Hydraulic Binder (slag and additives) |
|
107. Specialised glued laminated wood beam |
|
108. Annular ringed shank nails and connector screws |
109. Fly ash for concrete
109.1 Fly Ash for Concrete Rev 1 |
|
110. Panels for acoustic and thermal insulation |
|
111. Pipe penetration seal using an intumescent mat |
|
112. Damper for damping vibrations, mainly in buildings |
|
113. Glass concrete composite system (gccs) |
|
114. Structural Sealant Glazing System |
|
115. Variable Geometry Moving Axix Unsprung Concealed Hinge Assembly |
|
116. Emergency Escape Bolt operated by a pull handle & frangible component |
|
117. Polyurethane-bound mats made of mineral material to be used for impact sound insulation |
|
118. Cement-bonded board |
|
119. Metal Anchor for use in autoclaved aerated concrete |
|
120. Levelling fastener system for roofs, walls and interior applications with sub-constructions made out of concrete |
|
121. Levelling fastener system for roofs, walls and interior applications with wooden sub-constructions |
|
122. Pre-fabricated elements made of concrete and reinforced concrete used in facilities to deal with liquid chemicals (substances hazardous to water) |
|
123. Sealing system made of asphalt to seal areas, suitable as installation for discharging water-contaminating liquids over sloping to use in construction works to deal with water-contaminating substances. |
|
124. Restoration system for sett paving areas |
|
125. Joint sealing system glued on concrete |
|
126. Surfacing material for a layer impervious to water contaminating substances |
|
127. Kit of waterproofing polymeric membrane and other components for creating a waterproofing system against action of water on walls and floors of buildings under indoor and outdoor conditions |
|
128. Kit of a Elastomer/Bitumen composite sheet and other components for creating a roof and construction waterproofing system |
|
129. Kit of liquid applied polymer modified mineral sealing mass and other components in contact with tile coverings for creating a waterproofing system against action of water on different parts of constructions under indoor and outdoor conditions |
|
130. Polypropylene foam insulating boards |
|
131. Intumescent, flexible fire stopping fire sealing product based on graphite (reactive material) |
|
132. Adhesive tape for structural glazing application |
|
133. Natural calcined pozzolana as type II addition |
|
134. Kit for pre-insulated aluminium ducts |
|
135. Ceramic coating for thermal insulation |
|
136. Translucent external wall insulation made of prefabricated façade panels |
|
137. Kit for soil nails |
|
138. Kit for rock and soil anchors |
|
139. Spherical bearing with special sliding material |
|
140. Floor covering on the basis of polyurethane |
|
141. Thin reflective insulation product intended to be used as thermal insulation complement in the construction envelope |
|
142. Spray-applied mineral wool |
|
143. Dry Plate |
|
144. Pipe liner for renovation of underground non-pressure sewerage networks with nominal pipe diameters from 100 mm to 1200 mm to be incorporated with a special procedure |
|
145. Steel beams with special joining technology |
146. Eastomeric bearings for the building sector Specific title of the products applied for:
Type "a": Elastomeric bearing of higher hardness |
|
147. Road Marking products |
|
148. A kit consisting of a thermal insulation board, fabricated from expanded polystyrene (EPS) and a defined facing to be used for accessible flat roofs for pedestrian traffic applied in a roofing system |
|
149. Finishing board, kit with patented click mechanism |
|
150. Plastic sheets for sealing of collecting basins and collecting rooms for the storage of water-contaminating liquids (liquids hazardous to water). |
|
151. Fire seals, smoke seals and combined fire and smoke seals - for fire resisting and/or smoke control door assemblies |
|
152. Unplasticized poly (vinyl chloride) (PVC-U) piping system for domestic waste water discharge inside the building to a maximum discharge temperature of 75 °C. |
|
153. Sheets of factory-made machine-welded fabric for cracking control in concrete elements |
|
154. Soft foam insulation |
|
155. Flexible coupling for gravity and pressure (below 1.5 bars) sewerage and drainage pipe |
|
156. Quenched and tempered wire for prestressing, ribbed and plane |
|
157. Plastic steps for underground man entry chambers |
|
158. Double wall static tanks made from rotating moulded polyethylene for above ground storage of domestic heating oils and diesel fuels |
|
159. Precast concrete products - Beams made of prestressed steel fibre concrete |
|
160. HRC T-headed reinforcement steel bar |
|
161. Special cement CEM III/A with high sulfate resistance |
|
162. Glass-crystallic Cladding plates |
|
163. Self-Adhesive Glass mesh Tape |
|
164. Highly densified EPS as a load bearing and thermal insulating element |
|
165. Insulation product made of expanded perlite (EPB) |
|
166. Composite cement (clinker, blast furnace slag, natural puzzolana) class 32,5 N-LH with high sulfate resistance |
|
167. Wood & Metal composite lighting columns |
|
168. Sauna Stove fired by wood |
|
169. Polyestyer fibre thermal & Acoustic insulation |
|
170. Timber Frame Kit |
|
171. Kit Composed by sub frame and fixings for fastening cladding elements and also external wall elements, made of stone and ceramics |
|
172. A packaged small domestic waste water treatment plant for up to 50 PT, made of rotationally moulded PE for use underground and subjected to traffic loads |
|
173. Compostion toilet |
|
174. With bricks coated external insulation system |
|
175. Boards made of natural agglomerated cork for thermal and acoustic insulation |
|
176. Bitumen shingles with mineral or synthetic reinforcement |
|
177. Laminated bitumen shingles with mineral or synthetic reinforcement |
|
178. Fiberboard for wall and roof constructions, vapour open |
|
179. Floor panel with a polyurethane surface |
|
180. Profiled steel sheeting for floor systems in combination with a ribbed reinforced concrete slab |
|
181. Punched metal plate fasteners |
|
182. Welded gabion products |
|
183. Pool Safety Cover |
|
184. Prefabricated cable pits in reinforced concrete |
|
185. Prefabricated cable pits made of polystyrene (ps) recycled |
|
186. Calcium carbonate fines as additions for concrete with binding properties similar to additions type II. |
|
187. Masonry Spacer Mat |
|
188. Roof insulation supporting roofing tiles |
|
189. One component bitumen-polyurethane resin for flashing application applied directly to bitumen waterproofing membrane used in the horizontal part of the roof |
|
190. Remedial Damp-proof course |
|
191. Powered pedestrian door drives and systems |
|
192. Sandwich boards composed by three layers, respectively of agglomerated cork, coconut fibres and fibreboard MDF |
|
193. Agglomerated cork and grain recycled rubber with polyurethane binder |
|
194. Agglomerated cork with polyurethane binder |
|
195. Mortar with insulating components for floor-decks |
|
196. Cast-in anchor with internal threaded socket |
|
197. Fastening screw for metal sheet roof covering |
|
198. Fabricated fittings manufactured by heat moulding (thermo moulding) from an extruded unplasticized poly(vinyl chloride) (PVC-U) pipe with an intermediate layer of PVC-U foam, to be used with PVC-U pipes for non-pressure drainage and sewerage buried in the ground. |
|
199. Swivel joints manufactured by heat moulding (thermo moulding) from an extruded unplasticized poly(vinyl chloride) (PVC-U) pipe, with a free angle of deflection to a maximum of 30 ° to increase the flexibility of fittings, such as brands, couplers and saddles, in buried non-pressure and sewage applications |
|
200. Copper plumbing tube with polyethylene covering for sanitary and heating applications |
|
201. Kit for closure system for conveyors systems |
|
202. Insulation material made of granulated polystyrene and compound |
|
202.1 (Rev1) Insulation material made of granulated polystyrene and compound |
|
204. Glazing guardrail kit |
|
205. PVC sheet for leak protecting linings |
|
206. Thermomechanically rolled long steel products made of weldable fine grain structural steel of special steel grades |
|
207. Structural sealant glazing on wood frame |
|
208. External Thermal Insulation Composite System faced with clinker brick |
|
209. Semi-flexible pavement/floor topping |
|
210. Ventilated façade system with self-supporting composite panels. |
|
211. Mechanical Anchorages for Reinforcing Bars |
|
212. Reinforcing Bars with Threaded Ribs |
|
213. Hot rolled products of structural steels |
|
214. Plastics piping kits for the transport system of hot and cold water, intended for human consumption, made of glass reinforced polypropylene |
|
215. Plastics piping kits for heating systems, made of glass-reinforced polypropylene |
|
216. Plastics piping kits to be used in fixed fire fighting systems, made of glass-reinforced polypropylene |
|
217. Light weight cementitious screed |
|
218. Modular tiles of natural stone including snap-on connection and polyurethane layer |
|
219. Factory-made boards and products formed by moulding of a silicate polystryrene composite for the thermal and/or acoustical insulation |
|
220. An anchor device designed to be fully bonded to a multi layered modified bitumen roof waterproofing system provided with a polyester reinforcement , to form a structural anchor without perforating the roof waterproofing system, intended to connect a personal fall protection system |
|
221. Bolted glazing kit |
|
222. Wood-concrete composite slab |
|
223. Light weight floor system |
|
224. Integrated facade kits with active and/or passive solar elements (IFK-SRE) |
|
225. Concrete Protection Linings of Collecting Basins/Rooms for Liquids Hazardous to Water |
|
226. Sealing Kit for Filling Areas of Petrol Stations |
|
227. Reinforcing Kit with Carbon Fibre Laminates for the Strengthening of Beams and Plates of reinforced and Prestressed Concrete |
|
228. Light composite wood-based beam |
|
229. Liquid applied roof waterproofing kits based on block co-polymer elastomeric, 100% synthetic rubber |
|
230. Kit for reinforced concrete members subject to compressive loading |
|
231. Sand Bentonite Polymer Gel(SBPG) for application as a sealing barrier or as a component of a sealing barrier system |
|
232. Sump pallets made of steel |
|
233. Connections for precast concrete columns and beams |
|
234. Connection Units for Concrete staircases and slabs |
|
235. Type I addition for concrete |
|
236. Type II addition for concrete |
|
237. Chimney kit with clay flue liner |
|
238. Prefabricated wall elements of bonded clay masonry unit |
|
239. Kit for bonding of clay masonry units on site |
|
240. Permanent shuttering for floors |
|
241. Floor insulation based on polystyrene light weight concrete |
|
242. Precast concrete products-Wall elements of steel fibre concrete |
|
243. Structural composite lumber products: Laminated Strand Lumber (LSL) and Parallel Strand Lumber (PSL) |
244. Road marking materials - retroreflective elements with refractive
index 1.9
Road marking materials - retroreflective elements with refractive
index 2.4 |
|
245. Structural Sealant Glazing Kit as infill element for façade contructions |
|
246. Suppression mode early suppression, fast response automatic sprinkler |
|
247. Insulated glass unit punctually anchored |
|
248. Glued laminated timber beam with 2 or more waney lamellas |
|
249. Modified Fly Ash for concrete |
|
250. Special drawn sheet glass |
|
251. Kit for non-loadbearing internal and external walls made of glass blocks |
|
252. Wooden shingles |
|
253. Parapet made of glass with failure protection |
|
254. In situ sprayed polyurethane foam for sealing joints, filling cavities and for fixing construction elements |
|
255. Mortars based on sulphur |
|
256. Sulphur concrete elements |
|
257. Fibres for concrete : metallic amorphous fibres |
|
258. Factory made masonry units of cement bonded wood chips |
|
259. Prefabricated timber framed load-bearing wall elements |
|
260. Box Beam with perforated, inclined webs |
|
261. Expanding structural bolting assemblies for blind fastening of steel components |
|
262. Steel mesh for retaining of unstable slopes by controlling and preventing rockfalls and loose debris flow along highways roads, and railways |
|
263. Cable Net Systems |
|
264. Wire Rope Loop System to Connect Precast Concrete Components |
|
265. Plastic Anchor for Use in Concrete |
|
266. Powder Actuated Fastener for Multiple Use in Concrete for Non-structural Applications |
|
267. Coating System for Inside Use of Tanks Made of Steel for the Storage of Liquids Hazardous to Water |
|
268. Light Weight Roof System |
|
269. EPI adhesives |
|
270. Calcined layer silicate based type II addition |
|
271. Sedimentation reducing concrete admixture |
|
272. Roof and wall systems with hidden fastenings |
|
273. Flat aluminium products made of aluminium alloy EN-AW-5059 |
|
274. Corrugated bitumen tiles |
|
275. Large span load-bearing sandwich panels for roofing |
|
276. Reinforced tape for assembled gypsum platerboards |
|
277. Prefabricated Small Wastewater Treatment Plants |
|
278. Insulation Product made of Wood Shavings, Inorganic Cementing Agent and water |
|
279. Thermal insulation board made of expanded polystyrene (EPS) and cement |
|
280. Expanded polystyrene (EPS) insulating blocks |
|
281. Polymeric concrete addition |
|
282. Load bearing thermal insulation elements which form a thermal break between balconies and internal floors |
|
283. Powder-coating system for structural steel components without previously galvanizing |
|
284. Solid wood slab element - element of dowel jointed timber boards to be used as a structural element in buildings |
|
285. Prefabricated wood slab element made of mechanically jointed square-sawn timber members to be used as a structural element in buildings |
|
286. Rubber fibre mat to be used for impact sound insulation |
|
287. Prefabricated steel and stainless steel wire ropes with end connector |
|
288. Self-tapping screws for use in timber construction |
|
289. Extended Coverage Control Mode Automatic Sprinkler |
|
290. Suspended ceiling kits for use in exterior applications |
|
291. Terrace decking kit |
|
292. Processed blend of main constituents according to EN 197-1, without clinker, as a type II addition for concrete |
|
293. Corrugated plastic ducts |
|
294. Welded gabion products |
|
295. Spacer system for site assembled double skin metal roof and wall cladding. |
|
296. Fastening Screws for Sandwich Panels |
|
297. Thermal insulation roof kit for metal or flexible roof coverings |
|
298. Roof slates |
|
299. Kit for prestressed flat slabs with steel fibre reinforced concrete |
|
300. Low shrinkage calcium sulphoaluminate cement |
|
301. Insulating Glass Units Production with Heat Mirror Film |
|
302. Mineral pre-coated ceiling panels |
|
303. Self-adhesive Anti-slip Covering for Floorings |
|
304. Liquid Applied Water Vapour Control Layers |
|
305. Factory made vacuum insulation panel (VIP) |
|
306. Granulated polystyrene for core thermal insulation of cavity walls (two-leaf masonry walls) |
|
307. Cement - bonded insulating board made of wood chips |
|
308. Heat Mirror |
|
309. Kits for green roofs |
|
310. Thin walled steel flat products predominantly for roofing and cladding with organic coil-coating system |
|
311. Steel corrugated culverts |
|
312. A Rubber/Bitumen Liquid Applied® Bridge Deck System |
|
313. Floor void former |
|
314. Surface maintenance treatment for highways |
|
315. Surface repair treatment for highways |
|
316. Rapid Hardening Calcium Sulphoaluminate based Cement |
|
317. Kit for prestressed flat slabs with steel fibre reinforced concrete |
|
318. Kit of concrete columns and prefabricated bracing light-weight concrete infill |
|
319. Plantable coverings made of welded steel grids for slope stabilisation systems |
|
320. Welded soil boxes |
|
321. Cast or spray applied hemp/lime kit for internal and external wall construction |
|
322. Kit consisting of chimney flue liner and ancillaries |
|
323. Composite boards made of agglomerated cork and grain recycled rubber for acoustic and thermal insulation |
|
324. Hydraulic filling material for large underground volumes |
|
325. Radon detector device |
|
326. Finger Jointed green wood for structural application |
|
327. Load Bearing timber framed wall panels |
|
328. Steel framed membrane building kit |
|
329. Reaction resin mortar for joints between concrete elements |
|
330. Roof covering kit using in-situ sprayed polyurethane foam |
|
331. Glued laminated timber with high-strength lamellas and special longitudinal joints |
|
332. Granulated polystyrene foam with binding agent as non-load bearing thermal insulation |
|
333. Plastics piping kits for heating systems, made of multilayer composite pipes and compression fittings |
|
334. Plastics piping kits for heating systems made of crosslinked medium density polyethylene (PE-MDX) |
|
335. Plastics piping kits for heating systems, consisting of pipes made of PB-R and mechanical and/or welded fittings |
|
336. Plastics piping kits for heating systems, consisting of pipes made of PB-H Type II and mechanical and/or welded fittings |
|
337. Light gauge secondary structures |
|
338. Metal Frame self-storage system |
|
339. Alkali resistant glass fibres containig zirconium dioxide for the use in concrete |
|
340. Spun columns with reinforcement areas of longitudinal reinforcement higher than 8% up to 16% of the area of the concrete section |
|
341. LAMI Glass fibre reinforced polyester doors (LAMI GTP doors) |
|
342. Hot rolled products and structural components made of steel grades Q325B, Q235D,Q345B and Q345D |
|
343. Glass-fibre reinforced plastic bar used as reinforcing bar of concrete |
|
344. Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances and ancillaries |
|
345. Strength graded finger jointed structural timber - solid, tension proof loaded, structural timber beams and, used as laminations, flatwise laminated beams with up to 4 laminations |
|
346. Flexible plug expansion joint for road bridges |
|
347. Mechanical splice for reinforcing steel bars |
|
348. Ventilation ducts made from insulation boards |
|
349. Kit for system stove-chimneys with clay/ceramic flue liner and integrated stove |
|
350. Structural glazing system mechanically supported with fix points |
|
351. Structural glazing system mechanically supported with holders |
|
352. Roof Hatches, Floor, Wall and Ceiling Doors providing access or for use as an emergency door / with or without fire resistance |
|
353. Blind rivets for metal members and sheeting |
|
354. Vacuum insulation panel (VIP) with factory apllied protection layers |
|
355. Lift control pot bearing |
|
356. Load bearing external wall kit |
|
357. Kit for load bearing masonry subject to seismic actions |
|
358. Internal wall-and floor- covering made of coconut shells |
|
359. Sealing device for waterproofing form tie holes, holes or cast-in pipes in concrete casting and masonry walls |
|
360. Liquid applied roof waterproofing kit based on a rubbersolution |
|
361. Early Suppression, Fast Response (ESFR), K240 to K360, Upright and Pendent Automatic Fire Sprinklers |
|
362. Polyester fibre mat with embedded silica aerogel |
|
363. Steel Lighting columns |
|
364. Strength graded structural timber - square edged logs with wane |
|
365. Monolithic or laminated beam and wall logs made of timber |
|
366. Kit for friction pipe anchors |
|
367. Fire resistant access panel for installation in walls or ceiling |
|
368. Plastics piping kits as a transport system of hot and cold water, intended for human consumption, consisting of pipes made from PB-H Type II and mechanical and/or welded fittings |
|
369. Fireplaces Fired by Solid Fuel - Operated Independent of the Room Air |
|
370. Low lambda composite board for internal use |
|
371. Columns of glued laminated timber with 2 to 4 lamellas for timber frames for buildings |
|
372. Reconstituted stones for wall cladding |
|
373. Load bearing thermal insulation base tub of expanded polystyrene (EPS) |
|
374. Sun Tunnel |
|
375. Flexible plug expansion joint for railway bridges |
|
376. Prefabricated elements for sea wall protection |
|
377. Stay Cable system |
|
378. With sprinkler kit fire protected steel structures |
|
379. Prefabricated building units based on glass fibre reinforced polyester (GRP) structural components mounted on a steel grill floor |
|
380. Premix for ultra High Performance Fibre-Reinforced Concrete/Mortar |
|
381. Kit for roofing systems made of polyler slates and ancilleray products |
|
382. Board made of change phase material |
|
383. Fiber-reinforced composite connectors anchored in concrete |
|
384. Pre-formed drywall lining accessories |
|
385. Carbon fibre reinforced polymer composite laminate for the strengthening of structures |
|
386. Multimaterial composite slab to be used in building kits |
|
387. Snow Stopper for Roof |
|
388. Kit for ventilation system with heat recovery |
|
389. Structural steel piles with hollow sections and rigid splices |
|
390. Kits for external wall cladding systems with exterior continuous finishes applied in situ for ventilated and non-ventilated façades |
|
391. Reinforced concrete sandwich element with embedded cylinders in thermoplastic polymer for translucent wall elements |
|
392. Sandwich panels made from a polyurethane core with magnesium oxide/magnesium chloride facings on both sides |
|
393. Hot finished structural hollow sections of non-alloy and fine grain steels with enhanced fire resistance performance |
|
394. Modular construction system |
|
395. Plastic sheets made of polyethylene for the lining of collecting basins and collecting rooms for the storage of liquids hazardous to water |
|
396. Factory-made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/ or acoustical insulation |
|
397. Spherical or cylindrical bearing with special friction material |
|
398. Alga Sferon Hotslide Spherical Bearings |
|
399. Portland-pozzolanic cement for use in tropical conditions |
|
400. Elastic micro hollow spheres as concrete admixture |
|
401. Substructure kit for heated buildings. |
|
402. Kits for bridging expansion joints with and without sealing function for trafficked and non-trafficked areas of buildings |
|
403. Waste water pipe renovation with inner coating of glass-fibre reinforced polyester compound, for use inside and outside buildings |
|
404. Plastics piping kits as a transport system of hot and cold water, made from cross linked medium density polyethylene (PE-MDX) |
|
405. Dowel-type fasteners with resin coating |
|
406. Constant Force Post Anchor Device, Single Point Anchor Device, Horizontal Cable Anchor Device and Single Span Overhead Horizontal Cable Anchor Device |
|
407. Eccentric anchored sheet piles |
|
408. Concrete element kit for building services |
|
409. Pot bearing with special sealing |
|
410. Timber Structures – Glued-in rods for timber connexions |
|
411. Hard gypsum plasterboards for load bearing applications |
|
412. Self supporting light weight insulation panels |
|
413. After treatment system for the effluent of small wastewater treatment systems - disinfection |
|
414. Thermal break made of cellular glass for structural and non structural masonry walls |
|
415. Zinga Anti-Corrosion Paint for Steel |
|
416. Kit for non load-bearing mineral board external wall systems |
|
417. Profiled aluminium nail for use in timber structures |
|
418. Steel mesh systems for reinforced fill |
|
419. Fasteners for mechanical fastening of waterproofing and/or insulation on to the old waterproofing/insulation in renovation |
|
420. Thermal vacuum insulation panel based on a microporous core encapsulated in a factory applied multi-layer protective barrier film |
|
421. Steel mesh for retaining of unstable slopes |
|
422. Walls, roofs and ceilings made of OSB panels which are glued together on their surfaces |
|
423. Fire-fighting robot kit to be used in tunnels, subsurface facilities and restricted spaces |
|
424. Corrosion protection system for load bearing cables |
|
425. Hot rolled and hot-dip coated steel flat products made of steel grade S390GD |
|
426. Girder clamp |
|
427. Self supporting light weight insulation panels |
|
428. Special high-strength structural bolting assemblies for friction and torsion free preloading |
|
429. Glue laminated timber made of hardwood |