Technical reports

EOTA Technical Reports (EOTA TR) are developed as supporting reference documents to other EOTA publications, especially European Assessment Documents (EAD). They are often developed alongside and together with these EADs, to cover aspects that go beyond the pure product assessment or beyond a single EAD.

As such, EOTA TRs detail relevant aspects such as design, execution or on-site testing. They may also contain horizontal assessment methods relevant for multiple EADs. They reflect the common understanding of the Technical Assessment Bodies in EOTA of the state of the art at a particular point in time. Technical reports can be revised or updated. Amended TR versions supersede the previous ones.

Technical Report numberTechnical Report titleYear
EOTA TR001

Determination of impact resistance of panels and panel assemblies

2003
EOTA TR002

Test methods for light composite wood-based beams and columns

2000
EOTA TR003

Determination of the watertightness

2004
EOTA TR004

Determination of the resistance to delamination

2004
EOTA TR005

Determination of the resistance to wind loads of partially bonded roof waterproofing

2004
EOTA TR006

Determination of the resistance to dynamic indentation

2004
EOTA TR007Determination of the resistance to static indentation2003
EOTA TR008

Determination of the resistance to fatigue movement

2004
EOTA TR009

Determination of the resistance to sliding

2004
EOTA TR010

Exposure procedure for artificial weathering

2004
EOTA TR011

Exposure procedure for accelerated ageing by heat

2004
EOTA TR012

Exposure procedure for accelerated ageing by hot water

2004
EOTA TR013

Determination of crack-bridging capability

2004
EOTA TR014

Exposure procedure for accelerated ageing of glass reinforced unsaturated polyester resins by two-hour water boil

2004
EOTA TR015

Principle for the static calculation of connections made with three dimensional nailing plates, with examples

2002
EOTA TR016

Method of testing Three-Dimensional Nailing Plates with examples

2012
EOTA TR017

Worked example calculation of characteristic load-carrying capacities of 90° angle bracket with a rib

2012
EOTA TR018

superseded by EAD 330499

Assessment of torque-controlled bonded anchors

2003
EOTA TR019

Calculation models for prefabricated wood-based Loadbearing stressed skin panels for use in roofs

2005
EOTA TR020

Evaluation of Anchorages in Concrete concerning Resistance to Fire

2004
EOTA TR021 (old version)

Reaction to fire requirements for small components

2005
EOTA TR021Reaction to fire requirements for small components2020
EOTA TR022

Determination of the resistance to the passage of chloride ions through a waterproofing layer subjected to indentation by aggregate

2007
EOTA TR023

superseded by EAD 330087

Assessment of post-installed rebar connections

2006
EOTA TR024 (old version)

Characterisation, Aspects of Durability and Factory Production Control for Reactive Materials, Components and Products

2009
EOTA TR024Technical description and assessment of reactive products effective in case of fire2019
EOTA TR025

Point thermal transmittance of plastic anchors for etics

2016
EOTA TR026

Plate stiffness of plastic anchors for ETICS

2016
EOTA TR029 

superseded by EN 1992-4:2018

Design of Bonded Anchors

2010
EOTA TR030

Factory made boards and products formed by moulding of a silicate polystyrene composite

2008
EOTA TR031

Fire Resistance Tests for Cavity Barriers

2008
EOTA TR032

Bending Test for swivel Joints made of PVC-U

2009
EOTA TR033

Test method for discontinuously laid bituminous roof covering products – Determination of watertightness

2009
EOTA TR034 

Superseded by EOTA GD14

General BWR3 Checklist for EADs/ETAs - Dangerous substances

2015
EOTA TR035

Rules for extended application of test results of fire resisting elements

2013
EOTA TR036

A factory made structural anchor for attaching personal fall protection equipment, designed to be permanently fully bonded to a multilayered modified bitumen roof waterproofing system provided with polyester reinforcement to a maximum roof slope of 15°, without perforating the roof waterproofing system

2013
EOTA TR037

Test method for elastomeric insulating elements – Determination of creep

2011
EOTA TR038Assessment procedure for durability of thin metallic composite panels2017
EOTA TR039

Ventilated façade system with self-supporting composite panels

2013
EOTA TR040

Factory-made boards and products formed by moulding of an expanded polylactic acid (EPLA) for thermal and / or acoustical insulation

2012
EOTA TR041Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate2017
EOTA TR042

Plastics piping kits for heating systems, consisting of pipes made of PB-R and mechanical and or welded fittings

2012
EOTA TR043

Plastics piping kits for the underground transport under pressure of water not intended for human consumption, made of glass reinforced filament wound epoxy (GRE)

2013
EOTA TR044

Acoustic evaluation of Lightweight Building Structures

2013
EOTA TR045 

superseded by EN 1992-4:2018

Design of Metal Anchors For Use In Concrete Under Seismic Actions

2013
EOTA TR046

Test methods for foam adhesives for External Thermal Insulation Composite Systems (ETICS)

2014
EOTA TR047Design of anchor channels2018
EOTA TR048Details of tests for post-installed fasteners in concrete2016
EOTA TR049

Post-installed fasteners in concrete under seismic action

2016
EOTA TR050 (old version)

Anchor channels under fatigue loading

2015
EOTA TR 050

Calculation Method for the Performance of Anchor Channels under Fatigue Loading

2018
EOTA TR051 (old version)Recommendations for job-site tests of plastic anchors and screws2016
EOTA TR051Recommendations for job-site tests of plastic anchors and screws2018
EOTA TR052Recommendations for job-site tests of powder-actuated fasteners for ETICS for use in concrete2017
EOTA TR053Recommendations for job-site tests of metal injection anchors for use in masonry2016
EOTA TR054Design methods for anchorages with metal injection anchors for use in masonry2016
EOTA TR055Design of fastenings based on EAD 330232-00-0601, EAD 330499-00-0601 and EAD 330747-00-06-012018
EOTA TR058Increase of punching shear resistance of flat slabs or footings and ground slabs –lattice girders- Calculation methods2017
EOTA TR060Increase of punching shear resistance of flat slabs or footings and Ground slabs – double headed studs –Calculation Methods2017
EOTA TR061 (old version)Design method for fasteners in concrete under fatigue cyclic loading2018
EOTA TR061Design method for fasteners in concrete under fatigue cyclic loading2020
EOTA TR062Design of fasteners for facade panels made of natural stone 
(except slate)
2018
EOTA TR064Design of plastic anchors in concrete and masonry2018
EOTA TR065

Design of structural joints with shear dowels

2019
EOTA TR066 (old version)

Design and requirements for construction works of post-installed shear connection for two concrete layers

2019
EOTA TR066 (old version)Design and requirements for construction works of post-installed shear connection for two concrete layers2019
EOTA TR066 Design and requirements for construction works of post-installed shear connection for two concrete layers2020
EOTA TR067

superseded by EAD 200102

Bending of column shoe connections - tests and results2018
EOTA TR068 (old version)Calculation methods for column shoe connections2018
EOTA TR068 Design of structural connections with Column Shoes2020
EOTA TR069Design method for anchorage of post-installed reinforcing bars (rebars) with improved bond-splitting behavior as compared to EN 1992-1-12019
EOTA TR070Design of Glued-in Rods for Timber Connections2019
EOTA TR072Provisions for the determination of construction products’ propensity to undergo continuous smouldering in EADs2020
EOTA TR074Design of wire loop systems for the connection of precast and in-situ concrete elements2020